Troy Bilt Storm 2410 User Manual

Posted : admin On 12/21/2021

Page 17: Auger control, Chute assembly, Skid shoes

Advertising

Auger Shaft

At least once a season, remove the shear pins from the auger

This Operator’s Manual is an important part of your new engine. It will help you prepare and maintain the engine for the best performance. Please read and understand the contents before operating the engine.

shaft. Spray lubricant inside the shaft and around the spacers

and the flange bearings found at either end of the shaft.

See Fig. 6-3.

Adjustments

Shift Cable

If the full range of speeds (forward and reverse) cannot be

achieved, refer to the figures to the right and adjust the shift

cable as follows:

Place the shift lever in the fastest forward speed position.

Snowblower

1.

Loosen the hex nut on the shift cable index bracket. See

2.

Fig. 6-4.

Pivot the bracket downward to take up slack in the cable.

3.

Retighten the hex nut.

4.

Auger Control

Refer to the Assembly and Set-up section for instructions on

adjusting the auger control cable.

Chute Assembly

Refer to the Assembly and Set-up section for instructions on

adjusting the skid shoes chute assembly.

Skid Shoes

Refer to the Assembly and Set-up section for instructions on

adjusting the skid shoes.

Figure 6-4

2410

Figure 6-3

17

s

ectiOn

6 — M

aintenance

& a

djustMents

Troy Bilt Storm 2410 Owners Manual

Advertising
Popular Brands

Troy Bilt Storm 2410 Reviews

Popular manuals