Toshiba E Studio 2040c User Manual

Posted : admin On 12/21/2021

Toshiba Manuals; All in One Printer; e-studio 2040c; Toshiba e-studio 2040c Manuals Manuals and User Guides for Toshiba e-studio 2040c. We have 3 Toshiba e-studio 2040c manuals available for free PDF download: Imaging Manual, Troubleshooting Manual, Quick Start Manual. Learn how to perform various user functions at your e-STUDIO device, including. E-STUDIO 2040c 2540c 3040c 3540c 4540c. ©2019 Toshiba America Business.

  1. Toshiba 2040c Manual

Toshiba e-Studio 2040c Imaging Manual. Download Imaging manual of Toshiba e-studio 4540c All in One Printer, Copier for Free or View it Online on This version of Toshiba e-studio 4540c Manual compatible with such list of devices, as: e-studio 4540c, e-studio 3540c, e-studio 3040c, e-studio 2540c, e-studio 2040c. E-STUDIO series model without adding another driver and settings are easily applied to multiple PCs. Cluster printing An optional e-BRIDGE Job Point commands the distribution of print jobs of up to ten e-STUDIO models linked by a network. Increased capacity Two 550-sheet universal cassettes come standard, and two 550-sheet. View and Download Toshiba E-Studio 2040c imaging manual online. E-Studio 2040c Copier pdf manual download. Also for: E-studio 2540c, E-studio 3040c, E-studio 3540c, E-studio 4540c.

Service Manual and Parts List Manual Toshiba e-STUDIO 2040C/2540C/3040C/3540C/4540C (Version 05 F, Oct. 2013);
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Toshiba e-STUDIO copier.
You can print, zoom or read any diagram, picture or page from this Service Manual and Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Toshiba e-STUDIO 2040C/2540C/3040C/3540C/4540C photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Content for Service Manual:
1.1 Main Feature of e-STUDIO2040C/2540C/3040C/3540C/4540C

2.1 Specifications
2.1.1 General
2.1.2 Copy
2.1.3 Print
2.1.4 Scan
2.1.5 e-Filing
2.1.6 Internet Fax
2.1.7 Network Fax
2.2 Accessories
2.3 System List
2.4 Supplies

3.1 Sectional View
3.1.1 Front side-1
3.1.2 Front side-2
3.1.3 Rear side
3.2 Electric Parts Layout
3.3 Symbols and Functions of Various Components
3.3.1 Motors
3.3.2 Sensors and switches
3.3.3 Electromagnetic spring clutches
3.3.4 Solenoids
3.3.5 PC boards
3.3.6 Lamps and heaters
3.3.7 Thermistors, thermopiles, and thermostats
3.3.8 Transformer
3.3.9 Others
3.4 Copy Process
3.5 Comparison with e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
3.6 General Operation
3.6.1 Overview of Operation
3.6.2 Description of Operation
3.6.3 Detection of Abnormality
3.7 Control Panel
3.7.1 General Description
3.7.2 Description of Operation
3.8 Scanner
3.8.1 General Description
3.8.2 Construction
3.8.3 Functions
3.8.4 Description of Operation
3.8.5 Process of detection of original size
3.9 Laser Optical Unit
3.9.1 General Description
3.9.2 Laser Precautions
3.10 Paper Feeding System
3.10.1 General Descriptions
3.10.2 Composition
3.10.3 Functions
3.10.4 Description of Operation
3.11 Process Unit Related Section
3.11.1 General description
3.11.2 Composition
3.11.3 Functions
3.11.4 Drum driving sleep mode
3.11.5 Description of Operation
3.12 Developer Unit
3.12.1 General Description
3.12.2 Composition
3.12.3 Functions
3.12.4 Functions of the toner cartridge PC board (CTRG)
3.13 Transfer Unit
3.13.1 General Descriptions
3.13.2 Composition
3.13.3 Difference of transfer belt unit
3.13.4 Contacting and releasing movement of the 2nd transfer roller
3.14 Image Quality Control
3.14.1 General Description
3.15 Fuser unit / Paper exit section
3.15.1 General Description
3.15.2 Composition
3.15.3 Difference of fuser unit
3.15.4 Electric Circuit Description
3.16 Automatic Duplexing Unit (ADU)
3.16.1 General Description
3.16.2 Composition
3.16.3 Drive of ADU
3.16.4 Description of Operations
3.17 Power Supply Unit
3.17.1 General description
3.17.2 Functions
3.17.3 Operation of DC Output Circuits
3.17.4 Output Channel
3.17.5 Fuse

4.1 Covers
4.1.1 Front cover
4.1.2 Inner tray
4.1.3 Tray back cover
4.1.4 Front upper cover
4.1.5 Front right cover
4.1.6 Left upper cover
4.1.7 Left cover
4.1.8 Left lower cover
4.1.9 Left rear cover
4.1.10 Right upper cover
4.1.11 Right rear cover
4.1.12 Right rear hinge cover
4.1.13 Right lower cover
4.1.14 Right front hinge cover
4.1.15 Bypass rear cover
4.1.16 Right inner cover
4.1.17 Upper rear cover
4.1.18 Rear cover-1
4.1.19 Rear cover-2
4.1.20 Rear cover-3
4.1.21 Waste toner cover
4.2 Control Panel
4.2.1 Stopper
4.2.2 Control panel unit
4.2.3 DSP board
4.2.4 KEY board
4.2.5 Touch panel (TCP)
4.2.6 Control panel cover
4.3 Scanner
4.3.1 Original glass
4.3.2 Lens cover
4.3.3 Automatic original detection sensor (APS sensor)
4.3.4 Exposure lamp (EXP)
4.3.5 Lens unit
4.3.6 Scan motor (M1)
4.3.7 Carriage-1
4.3.8 Inverter board (INV)
4.3.9 Carriage wire / carriage-2
4.3.10 Carriage home position sensor (S6)
4.3.11 Platen sensor (S7)
4.3.12 SLG board (SLG)
4.3.13 Scanner unit cooling fan (M30)
4.3.14 Exposure lamp cooling fan (M32)
4.4 Laser Optical Unit
4.4.1 Laser optical unit
4.4.2 Shutter unit
4.4.3 Shutter motor (M12)
4.4.4 Shutter status detection sensor (S20)
4.4.5 Slit glass cleaning pad
4.4.6 Polygonal motor
4.5 Paper Feeding System
4.5.1 Bypass unit
4.5.2 Hinge assembly
4.5.3 SFB board (SFB)
4.5.4 Bypass feed upper cover
4.5.5 Bypass upper guide
4.5.6 Bypass pickup solenoid (SOL1)
4.5.7 Bypass paper sensor (S40)
4.5.8 Bypass pickup roller
4.5.9 Bypass feed roller
4.5.10 Bypass transport roller
4.5.11 Bypass feed clutch (CLT8)
4.5.12 Bypass separation roller
4.5.13 Bypass feed sensor (S41)
4.5.14 Drawer feeding unit
4.5.15 Tray-up sensor (S31/S35) / Empty sensor (S32/S36)
4.5.16 Paper stock sensor (S33/S37)
4.5.17 Separation roller
4.5.18 Feed roller
4.5.19 Pickup roller
4.5.20 Drawer feed clutch (CLT3/CLT6)
4.5.21 Tray-up motor (M21)
4.5.22 Tray drive unit
4.5.23 2nd drawer transport clutch (Low speed) (CLT4)
4.5.24 2nd drawer transport clutch (High speed) (CLT5)
4.5.25 1st drawer detection switch (SW5) / 2nd drawer detection switch (SW6)
4.5.26 Paper feed guide assembly
4.5.27 2nd drawer feed sensor (S34)
4.5.28 Side cover switch (SW4)
4.5.29 Registration guide
4.5.30 Registration sensor (S28)
4.5.31 1st drawer feed sensor (S30)
4.5.32 Registration roller (Rubber)
4.5.33 Registration motor unit
4.5.34 Registration motor (M19)
4.5.35 Registration roller (Metal)
4.5.36 Paper dust holder
4.5.37 1st drawer transport clutch (Low speed) (CLT2)
4.5.38 Feed/transport motor (M20)
4.5.39 Feed/transport gear unit
4.5.40 1st drawer transport clutch (High speed) (CLT1)
4.5.41 1st drawer transport roller
4.5.42 2nd drawer transport roller
4.6 Process Unit Related Section
4.6.1 Process unit (EPU)
4.6.2 Process cover
4.6.3 Cleaning unit/ Developer unit
4.6.4 Main charger assembly
4.6.5 Main charger cleaner
4.6.6 Main charger grid
4.6.7 Needle electrode
4.6.8 Drum
4.6.9 Drum cleaning blade
4.6.10 Drum thermistor (THM1, THM2)
4.6.11 Discharge LED (ERS-Y, ERS-M, ERS-C, ERS-K)
4.6.12 Needle electrode cleaner detection sensor (S21)
4.6.13 Drum drive unit
4.6.14 Drum motor (M10)
4.6.15 Drum switching motor (M11)
4.6.16 Drum switching detection sensor (S19)
4.6.17 K drum phase sensor (S44)
4.6.18 Color drum phase sensor (S43)
4.7 Developer Unit
4.7.1 Waste toner box
4.7.2 Developer filter
4.7.3 Developer material
4.7.4 Doctor blade
4.7.5 Auto-toner sensor (S22, S23, S24, S25)
4.7.6 Developer sleeve
4.7.7 Mixer
4.7.8 Waste toner transport motor (M31)
4.7.9 Temperature / humidity sensor (S12)
4.7.10 Waste toner box full detection sensor (S13)
4.7.11 Waste toner paddle motor lock detection sensor (S14)
4.7.12 Waste toner paddle motor (M6)
4.7.13 Waste toner transport unit
4.7.14 Waste toner cover open/close detection switch (SW8)
4.7.15 Auger lock detection sensor (S42)
4.7.16 Developer unit motor (M9)
4.7.17 Developer drive unit
4.7.18 Toner motor assembly
4.7.19 Toner motor (M2, M3, M4, M5)
4.7.20 Toner cartridge detection sensor (S8, S9, S10, S11)
4.7.21 Ozone filter-1
4.7.22 EPU cooling fan (M33)
4.7.23 Ozone exhaust fan (M24)
4.7.24 Internal cooling fan (M23)
4.7.25 Ozone filter-2
4.7.26 Ozone filter-3
4.7.27 Front cover opening/closing switch (SW10)
4.8 Transfer Unit
4.8.1 Transfer belt cleaning unit
4.8.2 Transfer belt cleaning blade / Blade seal
4.8.3 Transfer belt unit (TBU)
4.8.4 Transfer belt
4.8.5 Drive roller
4.8.6 1st transfer roller
4.8.7 2nd transfer facing roller / 2nd transfer facing roller cleaning film
4.8.8 Tension roller
4.8.9 1st transfer roller cam motor (M8)
4.8.10 1st transfer roller status detection sensor (S15)
4.8.11 2nd transfer unit (TRU)
4.8.12 2nd transfer roller
4.8.13 TRU cover
4.8.14 Paper clinging detection sensor (S27)
4.8.15 2nd transfer roller position detection sensor (S29)
4.8.16 Transfer belt motor unit
4.8.17 Transfer cover switch (SW3)
4.9 Image Quality Control
4.9.1 Image quality control unit
4.9.2 Image position aligning sensor (front) (S16)
4.9.3 Image position aligning sensor (rear) (S17)
4.9.4 Image quality sensor (S18)
4.9.5 Sensor shutter solenoid (SOL2)
4.10 Fuser unit / Paper Exit Section
4.10.1 Fuser unit
4.10.2 Front side cover
4.10.3 Rear side cover
4.10.4 Heat roller cover
4.10.5 Pressure roller cover
4.10.6 Transport guide
4.10.7 Separation finger unit / Separation finger
4.10.8 Pressure roller / Pressure roller lamp (LAMP3)
4.10.9 Separation plate / Fuser belt unit / Heater lamp (center / side / sub)
4.10.10 Fuser belt / Heat roller / Fuser belt guide / Fuser roller
4.10.11 Pressure roller thermostat (THMO3)
4.10.12 Pressure roller center thermistor (THM4) / Pressure roller rear thermistor
4.10.13 Fuser belt center thermostat (THMO1)
4.10.14 Fuser belt rear thermostat (THMO2)
4.10.15 Fuser belt front thermistor (THM3)
4.10.16 Exit sensor (S26)
4.10.17 Exit unit
4.10.18 Upper exit roller / Lower exit roller
4.10.19 Fuser belt center thermopile(THMP1) / Fuser belt rear thermopile(THMP2). 4-160
4.10.20 Fuser motor (M17)
4.10.21 Exit section drive unit
4.10.22 Fuser drive unit
4.10.23 Fuser/exit section cooling fan (M25) / Exit motor (M18)
4.11 Automatic Duplexing Unit (ADU)
4.11.1 ADU maintenance position
4.11.2 Automatic Duplexing Unit (ADU)
4.11.3 ADU inside rear cover
4.11.4 ADU opening/closing switch (SW7)
4.11.5 ADU board (ADU)
4.11.6 ADU cover
4.11.7 Paper guide
4.11.8 ADU clutch (CLT7)
4.11.9 ADU drive unit / ADU motor (M22)
4.11.10 Upper transport roller
4.11.11 Middle transport roller
4.11.12 Lower transport roller
4.11.13 ADU entrance sensor (S38)
4.11.14 ADU exit sensor (S39)
4.11.15 ADU lower cover
4.11.16 ADU upper cover assembly
4.11.17 Cover interlock switch (SW2)
4.12 Removal and Installation of Options
4.12.1 MR-3021/3022 (Reversing Automatic Document Feeder (RADF))
4.12.2 KD-1027 (Paper Feed Pedestal (PFP))
4.12.3 KD-1028 (Large Capacity Feeder (LCF))
4.12.4 MJ-1101 (Finisher)
4.12.5 MJ-1106 (Saddle Stitch Finisher)
4.12.6 MJ-1031 (Hanging Finisher)
4.12.7 MJ-6103 (Hole punch unit)
4.12.8 KN-4530 (Bridge unit)
4.12.9 MF-3500 (Damp Heater Kit)

Toshiba E Studio 2040c User Manual

5.1 Overview
5.2 Service UI
5.2.1 Overview
5.2.2 Login procedure
5.2.3 [SERVICE MODE] Screen
5.2.4 Setting/Changing password
5.3 Input check (Test mode 03)
5.4 Output check (test mode 03)
5.5 Test print mode (test mode 04)
5.6 Operation Procedure in Adjustment Mode (05)
5.7 Test print pattern in Adjustment Mode (05)
5.8 Operation Procedure in Setting Mode (08)
5.9 Assist Mode (3C)
5.9.1 Assist Mode
5.9.2 Operating Procedure
5.10 HDD Assist Mode (4C)
5.10.1 General description
5.10.2 Operation procedure
5.10.3 Functions
5.11 File System Recovery Mode (5C)
5.11.1 Overview
5.11.2 Operation procedure
5.11.3 Functions
5.12 SRAM Clear Mode (6C)
5.12.1 General description
5.12.2 Operation procedure
5.12.3 Functions
5.13 List print mode (9S)
5.13.1 Operation procedure
5.13.2 List Printing
5.14 Pixel counter
5.14.1 Outline
5.15 Default setting / restore setting of the EFI Printer Board

6.1 Image Related Adjustment
6.1.1 Adjustment Order
6.1.2 Adjustment of the Auto-Toner Sensor
6.1.3 Performing Image Quality Control
6.1.4 Adjustment of Color Registration Control
6.1.5 Adjustment of the transfer belt due to environmental factors
6.1.6 Image Dimensional Adjustment
6.1.7 Paper alignment at the registration roller
6.1.8 Image dimensional adjustment at the printing section
6.1.9 Image dimensional adjustment at the scanning section
6.2 Image Quality Adjustment (Copying Function)
6.2.1 Automatic gamma adjustment
6.2.2 Density adjustment
6.2.3 Color balance adjustment
6.2.4 Gamma balance adjustment
6.2.5 Background adjustment
6.2.6 Judgment threshold for ACS (common for copy and scan)
6.2.7 Sharpness adjustment
6.2.8 Setting range correction
6.2.9 Adjustment of smudged/faint text
6.2.10 Color Adjustment of Marker
6.2.11 Beam level conversion setting
6.2.12 Maximum toner density adjustment to paper type
6.2.13 Maximum text density adjustment
6.2.14 Text/Photo reproduction level adjustment
6.2.15 Black header density level adjustment
6.2.16 Black area adjustment in twin color copy mode
6.2.17 Judgment threshold adjustment for blank originals
6.2.18 Background offsetting adjustment for RADF
6.2.19 Twin color copy / mono color copy adjustment
6.2.20 Maximum density adjustment for each paper type
6.3 Image Quality Adjustment (Printing Function)
6.3.1 Automatic gamma adjustment
6.3.2 Gamma balance adjustment (Black Mode)
6.3.3 Color balance adjustment
6.3.4 Adjustment of faint text
6.3.5 Upper limit value at Toner Saving Mode
6.3.6 Maximum toner density adjustment (OHP)
6.3.7 Fine line enhancement switchover
6.3.8 “PureBlack/PureGray” threshold adjustment (PCL)
6.3.9 “PureBlack/PureGray” threshold adjustment (Twin color mode)
6.3.10 “PureBlack/PureGray” threshold adjustment (PS)
6.3.11 “PureBlack/PureGray” threshold adjustment (XPS)
6.3.12 Toner limit threshold adjustment
6.3.13 Screen switchover
6.3.14 Sharpness adjustment
6.3.15 Thin line width lower limit adjustment
6.3.16 Offsetting adjustment for background processing
6.3.17 Color/black judgment setting for twin color printing images
6.3.18 Beam level conversion setting
6.4 Image Quality Adjustment (Scanning Function)
6.4.1 Gamma balance adjustment
6.4.2 Density adjustment
6.4.3 Background adjustment (Color Mode)
6.4.4 Judgment threshold for ACS (common for copy and network scan)
6.4.5 Sharpness adjustment
6.4.6 Setting range correction
6.4.7 Fine adjustment of black density
6.4.8 RGB conversion method selection
6.4.9 Adjustment of saturation
6.4.10 Background processing offset adjustment
6.4.11 Adjustment of the capacity and image quality of SlimPDF
6.4.12 Surrounding void amount adjustment
6.5 Image Quality Adjustment (FAX Function)
6.5.1 Density adjustment
6.5.2 Beam level conversion setting
6.6 Scanner
6.6.1 Adjustment carriages-1 and -2 positions
6.6.2 Belt tension adjustment of the Scan motor
6.7 Laser Optical Unit
6.7.1 Image Adjustment in Laser Optical Unit
6.8 Paper Feeding System
6.8.1 Sheet sideways deviation caused by paper feeding
6.8.2 Adjusting the clearance of the paper and side guides
6.9 Process Unit Related Section
6.9.1 High-Voltage Transformer Setting
6.10 Developer Unit
6.10.1 Adjustment of the Auto-Toner Sensor
6.10.2 Adjustment of the doctor-to-sleeve gap
6.11 Transfer Unit
6.11.1 Adjustment of the transfer belt due to environmental factors
6.11.2 Adjustment of Gap between Transfer Belt Unit (TBU) Drive Gears
6.12 Image Quality Control
6.12.1 Performing Image Quality Control
6.13 Fuser Unit / Paper Exit Section
6.13.1 Adjustment of the Separation Plate Gap

7.1 General Description
7.2 PM Display
7.2.1 General Description
7.2.2 PM Display Conditions
7.2.3 PM Display Contents
7.2.4 Counter Clearing
7.3 General Descriptions for PM Procedure
7.4 PM Support Mode
7.4.1 General Description
7.4.2 Operational flow
7.4.3 Operational screen
7.4.4 Access tree
7.5 Work flow of parts replacement
7.6 Preventive Maintenance Checklist
7.6.1 Scanner
7.6.2 Laser unit
7.6.3 Feed unit
7.6.4 Automatic duplexing unit
7.6.5 Bypass feed unit
7.6.6 Main charger
7.6.7 Drum/Cleaner unit, Cleaner related section
7.6.8 Developer unit (K, Y, M, and C)
7.6.9 Waste Toner Box
7.6.10 Transfer belt unit / Transfer belt cleaning unit
7.6.11 Image quality control unit
7.6.12 2nd transfer roller unit
7.6.13 Fuser unit
7.6.14 Exit unit
7.6.15 RADF (MR-3021/3022)
7.6.16 PFP (KD-1027)
7.6.17 LCF (KD-1028)
7.7 Storage of Supplies and Replacement Parts
7.8 PM KIT
7.9 Maintenance Part List
7.10 Grease List
7.11 Operational Items in Overhauling

8.1 General Descriptions
8.1.1 If a problem continues even after performing all troubleshooting
8.1.2 Collection of debug log with USB media
8.2 Error Code List
8.2.1 Jam
8.2.2 Service call
8.2.3 Error in Internet FAX / Scanning Function
8.2.4 Printer function error
8.2.5 TopAccess related error/Communication error with external application
8.2.6 MFP access error
8.2.7 Maintenance error
8.2.8 Network error
8.2.9 Error history
8.3 Diagnosis and Prescription for Each Error Code
8.3.1 Check item
8.3.2 Paper transport jam (paper exit section)
8.3.3 Paper misfeeding
8.3.4 Paper transport jam
8.3.5 Other paper jam
8.3.6 Cover open jam
8.3.7 RADF jam
8.3.8 Jam in bridge unit
8.3.9 Paper jam in finisher section
8.3.10 Paper jam in saddle stitcher section
8.3.11 Paper jam in puncher unit
8.3.12 Other paper jam
8.3.13 Paper feeding system related service call
8.3.14 Scanning system related service call
8.3.15 Fuser unit related service call
8.3.16 Communication related service call
8.3.17 RADF related service call
8.3.18 Circuit related service call
8.3.19 Laser optical unit related service call
8.3.20 Finisher related service call
8.3.21 Image control related service call
8.3.22 Copy process related service call
8.3.23 Other service call
8.3.24 Error in Internet FAX / Scanning Function
8.3.25 Printer function error
8.3.26 TopAccess related error/Communication error with external application
8.3.27 MFP access error
8.3.28 Maintenance error
8.3.29 Network error
8.4 Other errors
8.4.1 Equipment operation disabled after the installation of option(s)
8.4.2 Wireless LAN connection disabled
8.4.3 “Start page” printing disabled after the installation of the EFI Printer Board
(GA-1211, optional)
8.4.4 “Invalid Department Code” is displayed
8.4.5 Paper folded on the leading edge
8.4.6 Abnormality of Recovery from the Sleep Mode (poor fusing, toner offset or
delay of print start in the color mode)
8.4.7 Toner cartridge unrecognized
8.4.8 Error code “M00” is displayed while updating firmware
8.4.9 “Authentication Failed” is displayed
8.5 Troubleshooting for the Image
8.5.1 Color deviation
8.5.2 Uneven pitch and jitter image
8.5.3 Poor image density, color reproduction and gray balance
8.5.4 Background fogging
8.5.5 Moire /lack of sharpness
8.5.6 Toner offset
8.5.7 Blurred image
8.5.8 Poor fusing
8.5.9 Blank print
8.5.10 Solid print
8.5.11 White banding (in feeding direction)
8.5.12 White banding (at right angles to feeding direction)
8.5.13 Skew (slantwise copying)
8.5.14 Color banding (in feeding direction)
8.5.15 Color banding (at right angles to feeding direction)
8.5.16 White spots
8.5.17 Poor transfer
8.5.18 Uneven image density 1 (in feeding direction)
8.5.19 Uneven image density 1 (at right angles to feeding direction)
8.5.20 Uneven image density 2
8.5.21 Faded image (low density)
8.5.22 Image dislocation in feeding direction
8.5.23 Image jittering
8.5.24 Poor cleaning
8.5.25 Uneven light distribution
8.5.26 Blotched image
8.5.27 Stain on the paper back side
8.5.28 White void in the halftone
8.5.29 Paper wrinkle
8.5.30 White void in the halftone
8.5.31 Faint image (immediately after equipment installation)
8.5.32 Tilted image at the leading edge of paper

9.1 Removal and Installation of PC Boards/HDD
9.1.1 Hard disk (HDD)
9.1.2 Board cover
9.1.3 FAX cover
9.1.4 SYS/HDD cooling fan
9.1.5 SYS board
9.1.6 IMG board
9.1.7 LGC board
9.1.8 Switching regulator
9.1.9 High-voltage transformer (HVT)
9.1.10 FIL board
9.1.11 Board case
9.1.12 SRAM board
9.1.13 SRAM board
9.2 Precautions, Procedures and Settings for Replacing PC Boards and HDD
9.2.1 Precautions when replacing PC boards
9.2.2 HDD fault diagnosis
9.2.3 Precautions and procedures when replacing the HDD
9.2.4 Precautions and Procedures when replacing the SYS board
9.2.5 Procedures and settings when replacing the SLG board
9.2.6 Precautions and procedure when replacing the SRAM board
(for the SYS board)
9.2.7 Procedures and settings when replacing SRAM board (for LGC board)
9.2.8 Firmware confirmation after the PC board/HDD replacement
9.2.9 License re-registration using the one-time dongle
9.3 Precautions for Installation of GP-1070 and Disposal of HDD/Board
9.3.1 Precautions for Installation of GP-1070
9.3.2 Precautions when disposing of the HDD
9.3.3 Precautions when disposing of the SYS board
9.3.4 Precautions when disposing of the SRAM board (for SYS board)
9.3.5 Precautions when disposing of the SRAM board (for LGC board)

10.1 Auto Supply Order
10.1.1 Outline
10.1.2 Setting Item
10.1.3 Setting procedure
10.1.4 Order Sheet Format
10.2 Service Notification
10.2.1 Outline
10.2.2 Setting
10.2.3 Items to be notified

11.1 Firmware Updating with USB Media
11.1.1 Master data/System ROM/Engine ROM/Scanner ROM / RADF ROM
11.2 Patch Updating with USB Media
11.2.1 Master data/System ROM
11.3 Firmware Updating with PWA-DWNLD-350-JIG1
11.3.1 Writing the data to the download jig (PWA-DWNLD-350-JIG1)
11.3.2 System ROM
11.3.3 Engine ROM
11.4 Firmware Updating with K-PWA-DLM-320
11.4.1 Scanner ROM
11.4.2 RADF firmware (MR-3021/3022)
11.4.3 Finisher firmware (MJ-1031)
11.4.4 Finisher firmware (MJ-1101)
11.4.5 Finisher firmware (MJ-1106)
11.4.6 Converter Firmware (MJ-1101)
11.4.7 Converter Firmware (MJ-1106)
11.4.8 Saddle stitcher firmware (MJ-1106)
11.4.9 Hole punch unit firmware (MJ-6103)
11.4.10 Fax unit firmware (GD-1250)
11.5 Confirmation of the updated data
11.6 When Firmware Updating Fails
11.6.1 Procedure
11.6.2 Flow chart for correcting USB update failure
12.1 Data Cloning
12.1.1 General description
12.1.2 Precautions
12.1.3 Backup files
12.1.4 Cloning procedure
12.2 AES Data Encryption Function Setting
12.2.1 General description
12.2.2 Precautions
12.2.3 Setting procedure
12.2.4 Procedure for disabling data encryption function
12.2.5 Procedure for discarding HDD when data encryption function is enabled
12.3 High Security Mode
12.3.1 General description
12.3.2 Prior confirmation
12.3.3 Procedure for entering the High Security Mode
12.3.4 Precautions
13.1 Outline
13.2 Signal
13.2.1 Pin Layout
13.2.2 Details of the signals
13.3 Notices
13.3.1 Setting code
13.3.2 Setting value change and restrictions when using the Card Controller
13.3.3 Setting value change and restrictions when using the coin controller
13.3.4 Setting value change and restrictions when using the key counter
13.3.5 Installation of External Counter
14.1 AC Wire Harness
14.2 DC Wire Harness / Electric Parts Layout
15. SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
Input check (test mode 03)
Output check (test mode 03)
Test print mode (test mode 04)
Adjustment Mode (05) Codes
Setting Mode (08) Codes


Content for Parts List Manual:

Number of pages: 1616.

Toshiba 2040c Manual

e-STUDIO 2040C 2540C 3040C 3540C 4540C e-STUDIO2040C e-STUDIO2540C e-STUDIO3040C e-STUDIO3540C e-STUDIO4540C et2040C et2540C et3040C et3540C et4540C et-2040C et-2540C et-3040C et-3540C et-4540C