Cool Fire Iv Plus User Manual

Posted : admin On 12/21/2021

Innokin Cool Fire 4: Wattage Mode AKA Automatic Mode.

  1. Cool Fire Iv Manual

The Cool Fire IV has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor. The Cool Fire IV has a variable voltage range of 3.0 – 7.5 volts adjustable in.1 volt increments and a variable wattage range of 6.0 – 40.0 Watts, adjustable in.5 watts increments. View and Download Innokin Technology CoolFire ULTRA manual online. Temperature Control Vaping System. CoolFire ULTRA Vaporizers pdf manual download. Mar 10, 2016  Cool Fire 4 Problem. Discussion in 'New Members Forum. Hit the fire button 3 times rapidly and then switch the device off via the manual switch on the bottom. Then, switch it back to on, press the fire button 3 times. You are not the only one that has the exact same problem I have the exact same thing happening to my cool fire IV it's. Coolfire IV Instruction Manual Switching ON/OFF device: 1. Ensure that the ON/OFFswitch located on the underside of the Coolfire is in the ONposition 2. Suppress the activation button located on the side of the Coolfire 3 times in quick succession 3. To switch OFFrepeat the above 4.

Cool Fire Iv Manual

This is the recommended mode. In this mode, you don't need to worry about volts or ohms - simply select the power setting that delivers the taste and flavour that you like and sit back and enjoy (the device will automatically work out the volts/settings behind the scenes required to deliver your required power).

To enter wattage mode press and hold the '+' button and the 'fire' button at the same time until the display shows a 'W' next to the setting.

To check the power (wattage) setting that the device is set to, simply press the '+ or -' button for a few moments until the display shows the current setting (for example '28.0W') and let go. Should you wish to change the setting, hold either the '+ or -' button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required.

The display will cycle from 6.0W to 40.0W (in 0.5 steps). We recommend starting at the lowest setting (6.0) before trying a higher setting. Note that the last setting, will be remembered.

Fire

Why would you need to change the wattage? Well, this is the real beauty of a variable wattage (VW) device because tweaking the power can dramatically change your vaping experience. You can increase the power to intensify the flavour of your liquid and also to increase vapour production. Tobacco based flavours will usually withstand more power than fruit flavours, but the power settings work well with most types. Note that a similar thing could actually be said for changing the voltage - but requires you to decide how many volts are required for each atomiser - using wattage mode ensures that the technical decisions are worked out for you automatically. Wattage wins every time.